WHEN YOU FIRST UNBOX YOUR RAY-BAN GLASSES:
1. Remove the plastic tab between the case and the glasses
2. Make sure your glasses are redocked inside the case
3. Wait until the LED light starts flashing blue
4. Your device is now ready to pair
MANUALLY:
1. Place your glasses inside the case
2. Press and hold the button on the back of the case for at least 5 seconds
3. Wait until the LED light starts flashing blue
4. Your device is now ready to pair
PAIRING YOUR GLASSES WITH YOUR PHONE:
1. Download the Meta AI app from your app store and log in using your Meta account.
2. Turn on the Bluetooth setting on your phone.
3a. Start by turning on your glasses. Slide and hold the power switch towards the lens until the notification LED starts blinking white, then release it. The notification LED blinks white while your glasses turn on, which can take up to a minute. When the notification LED turns solid green, you’re ready to continue. (If you can’t complete this step, continue to 3b, otherwise move on to step 4).
3b. Your glasses need to be fully charged before pairing. If you need to charge your glasses, place them inside the charging case and connect the case to a power source before moving on to step 4.
4. Put your glasses into Bluetooth pairing mode. Fold both arms and hold capture button on top of the frames down for 12 secs until LED on the inside of the frames starts blinking blue. Your glasses will appear in the app when they’re in pairing mode, which can take up to 10 seconds.
5. Continue following the instructions in the Meta AI app to finish setting up your glasses.
6. Enjoy exploring your world in a new way with the Ray-Ban Meta collection.
For illustrated set up instructions, please refer to the Meta AI app.